Camshaft 911 RS / 911 RSR / 964 RSR / 993 RSR - Race - Right - 5.80 mm / 49mm BRG

Description

This camshaft is the most aggressive option available for a dedicated RS or RSR track car. It is manufactured in Germany by an elite German Racing Manufacturer, just like all of our camshafts. With this camshaft, you can expect increased performance in both the mid-range and top-end.

Specifications:
4 Bearing Camshaft
SOHC - 12V
Cast Camshaft
Hollow Drilled for Central Lubrication / Lobe Lubrication
Weighs 6.6 lbs. (3 kg)
Without a Drive for the Injection Pump

Intake Cam:
Cam Lift (Valve Lift in mm) = 13.8 mm
Opening Angle = 324°
Opening Angle Spread = 104°
Valve Lift at TDC (mm) = 5.8 mm
Bearing = Ø 49 mm

Exhaust Cam:
Cam Lift (Valve Lift in mm) = 13.8 mm
Opening Angle = 324°
Opening Angle Spread = 104°
Valve Lift at TDC (mm) = 5.6 mm
Bearing = Ø 49 mm

Please note: When changing the camshaft, always make sure that the parts in contact with the cam, such as rocker arms, tappets, valve adjustment plates, etc., are also replaced to prevent damage to the cam surface. The matching left side is part # 100105911002 and the corresponding valve kit is part # FVD10590151