Show Results For:
Crankshaft Sealing Ring - 30 x 50 x 10 mm
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold Indi...
Crankshaft Sealing Ring - Rear - Flywheel End - 90 x 110 x 12 mm
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold Indi...
Crankshaft Timing Gear - Size 0
Genuine gear, sourced in Germany to ensure quality, reliability and precise fitment. Please Note: Please check the model fitment tab to ensure accurate fitment. Sold Individually. 1 Necessary Pe...
Reference No.: 901 102 111 02
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 482.00
without Shipping
without Shipping
Crankshaft to Flywheel Seal 911 / 930 1965-77 - 65 x 85 x 10
High-quality Victor Reinz OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitmen...
Reference No.: 029 105 245 B
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 26.10
$ 17.00
without Shipping
without Shipping
Crankshaft with Bushing (exchange) 914-4 1,7L/ 1,8L
Nur 1,7L und 1,8L Motoren des Porsche 914-4 von 1970-76.
Reference No.: 021 198 351 AX
In Stock
Warehouse Germany
$ 1,240.00
without Shipping, without core charge $ 66.00
without Shipping, without core charge $ 66.00
Cross Member 964 / 965 - Reconditioning
Send us your cross member and we will check that all tolerances are still correct, we will strip it back to bare metal, cryo-treat and re-coat it. This process yields a stronger and more durable c...
Reference No.: 911 501 075 07GREQ
Expected in 4-14 days
$ 1,843.00
without Shipping
without Shipping
Reference No.: 911 341 031 01EQ
In Stock
Warehouse Germany
$ 67.00
without Shipping
without Shipping
Cross Member Support 930 1975-89
Genuine part sourced from Porsche AG in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 Necessary per car.
Reference No.: 930 341 031 02
Expected in 4-14 days
$ 57.00
without Shipping
without Shipping
Cross Over Pipe Connector Flange 911 1976-83 - Coated Steel
This cross over connector replaces original part # 930 111 157 01, it is a quality coated steel replacement part manufactured by Dansk. They offer a complete line of replacement parts to complement...
Cross Over Pipe Connector Flange 911 / 930 1978-84 - Stainless Steel
This cross over connector replaces original part # 930 111 157 01, it is a quality stainless steel replacement part manufactured by Dansk. They offer a complete line of replacement parts to comple...
Cross Panel 911 / 930 1974-89 - Without Air Conditioning
This is an OEM repair cross panel that includes the sealing rail, part # 911 501 395 00 and the jack support, part # 911 501 387 01. The part is made by Dansk, they offer a complete line of replac...
Cross Panel 911 / 930 1978-89 - With Air Conditioning (M559 Option) - OEM
This is an OEM repair cross panel that includes the sealing rail, part # 911 501 395 00 and the jack support, part # 911 501 387 01. The part is made by Dansk, they offer a complete line of replac...
Cross Shaft for Release Fork
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold indi...
Reference No.: 951 116 133 00
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
SRP: $ 53.07
$ 52.00
without Shipping
without Shipping
Crossover Bypass Pipe Set 993 - OBD1 - Bischoff Flange
Are you looking to improve your performance on the racetrack? If so, you may want to consider investing in this cross-over catalytic bypass set. This set effectively routes the left bank to the rig...
Crossover Bypass Pipe Set 993 - OBD1 - Gilett Flange
Are you looking to improve your performance on the racetrack? If so, you may want to consider investing in this cross-over catalytic bypass set. This set effectively routes the left bank to the rig...
Reference No.: 190 111 043 G
Availability upon request
$ 641.00
without Shipping
without Shipping
Crossover Pipe Gasket 930 / 965 3.3 L
This gasket sits between the right and left side heat exchangers on the crossover pipe. We recommend replacing your exhaust gaskets each time you remove your exhaust. If you reuse an old gasket, ...
Crossover Pipe Sealing Ring 911 / 930 1974-89
This ring sits between the right and left side heat exchangers on the crossover pipe. We recommend replacing your exhaust gaskets and seals each time you remove your exhaust. If you reuse an old ...
Crossover Sport Catalytic Set 993 - OBD1 + OBD2 - 100 Cell - Bischoff Flange - With Installation Kit
Are you experiencing issues with your current catalytic converters? Or are you looking to enhance your vehicle's performance? Look no further because this set of sport catalytic converters is the p...
Crossover Sport Catalytic Set 993 - OBD1 + OBD2 - 100 Cell - Gillett Flange - With Installation Kit
Are you experiencing issues with your current catalytic converters? Or are you looking to enhance your vehicle's performance? Look no further because this set of sport catalytic converters is the p...
Reference No.: FVD 721 T38 A
In Stock
Warehouse Germany
$ 90.00
without Shipping
without Shipping
Crown nut (Set) HA 924/ 944 -1985
Die Mutter, passend an der Radnabe der Hinterachse Ihres Porsche 924 und 944 bis 1985, wird aus hoch vergütetem Material aus dem vollen CNC gefräst ( Kein Guss Material ). Wir liefern hier einen Sa...
Reference No.: 311 501 221 SET
In Stock
Warehouse Germany
$ 17.00
without Shipping
without Shipping
Crush Washer - 22 x 27 mm
High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually.
Reference No.: 900 123 011 20
In Stock
Warehouse Germany
$ 2.00
without Shipping
without Shipping
Crush Washer - A 18 x 22 mm
Crush Washer typically used for the oil drain plug or the turbo oil reservoir. Sold Individually.
Reference No.: 900 123 140 30
In Stock
Warehouse Germany
$ 2.00
without Shipping
without Shipping
Crush Washer A18 x 24 x 1,5 mm
Sold Individually. 1 Necessary Per Car.
Cup holder - Phone holder edition (sliced on the side) - 991/ Boxster/ Cayman 2011-
In jedem Porsche 911 ( 991 ), Boxster und Cayman ab 2012 gibt es keine Ablage Möglichkeit mehr für Ihr Handy oder einen Kaffee-Becher. Die typischen Handy-Halterungen sehen auch nicht gerade schön...
Reference No.: FVD 642 991 02
In Stock
Warehouse Germany
Warehouse USA
$ 95.00
without Shipping
without Shipping
Cup Pipe Exhaust Straps 964 - 330 x 27 mm
Exhaust straps can become weak and corroded over the years. Be sure to check and replace when necessary. Made for our part # 170111044 Sold as a set. 1 necessary per car.
Reference No.: 170 111 044 1
In Stock
Warehouse Germany
$ 63.76
without Shipping
without Shipping
Cup R Carbon Fiber Mirrors
These are only for Cup or RS Race Doors!!
Reference No.: 100 732 996
Expected in 4-14 days
$ 1,683.00
without Shipping
without Shipping
Cup Side Muffler Bypass Kit - Fits all 997 GT3 / RS and 991 GT3 / RS Models - Motorsport
This kit is from the 997.2 GT3 Cup Car and contains Genuine Porsche Motorsport parts. It includes side muffler bypass pipes along with a Cup center muffler that increases exhaust flow, sound and p...
Reference No.: 997 111 027 94KIT
Availability upon request
$ 3,262.48
without Shipping
without Shipping
Custom RSR Shock - BILSTEIN - PSS10 - FRONT - LEFT
This is the ultimate front shock offering from Bilstein. It is the perfect solution for a double spring suspension. A bespoke shock that will be custom engineered to work together without comprom...
Reference No.: FVD 343 145 3LPS10
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 3,172.00
without Shipping
without Shipping
Custom RSR Shock - BILSTEIN - PSS10 - FRONT - RIGHT
This is the ultimate front shock offering from Bilstein. It is the perfect solution for a double spring suspension. A bespoke shock that will be custom engineered to work together without comprom...
Reference No.: FVD 343 145 3RPS10
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 3,172.00
without Shipping
without Shipping