Our modified crank sensor bracket allows the ability to run more advanced ignition timing. Gains of up to 20 HP more with bracket alone. Timing after the install Delta° = Delta / 2.44 = 16 / 2,44...
Reference Nr.: FVD 999 RS5 24A
Disponible
RRP: 159,01 EUR
129,00 EUR TVA 19% en plus
153,51 EUR TVA 19% inclus* Hors frais de Livraison
The stock shifter cables tend to wear down, which causes slop in the shifter and, in the worst cases, pop off the transmission during heavy use, leaving you stranded on the road. This shifter cable...
Reference Nr.: FVD 424 996 06
Disponible
144,00 EUR TVA 19% en plus
171,36 EUR TVA 19% inclus* Hors frais de Livraison
This steel fender joining plate is a prime coated and made by Dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All Dansk products are manufa...
Material: 304 Stainless Steel Finish: Brushed Stainless Weight: 1.5 lbs Models: For use with the R-9044, Floor Mount Installation: The 846R-2044 can be installed with the seat assembly stil...
Reference Nr.: 846 R20 44
Disponible
151,00 EUR TVA 19% en plus
179,69 EUR TVA 19% inclus* Hors frais de Livraison
Material: 304 Stainless Steel Finish: Powder coated in durable black wrinkle finish Weight: 1.75 lbs. Models: 997& '05 Boxster - Fits Power and Manual seats - Driver's side only. Does not fit t...
Reference Nr.: 846 R20 35
Disponibilité sur demande
178,00 EUR TVA 19% en plus
211,82 EUR TVA 19% inclus* Hors frais de Livraison
Transmission mount (overhauling) with harder 85 Shore bushings. - Reduces the movement of the transmission. - Improved the handling characteristics during acceleration and curves Note: Model ...
Reference Nr.: 997 375 033 03SPAK
Disponibilité sous 4-14 jours
RRP: 356,90 EUR
210,00 EUR TVA 19% en plus
249,90 EUR TVA 19% inclus* Hors frais de Livraison
Material: Derlin Finish: N/A Weight: 2 oz. Models: Used with 846 R9010 camera mount. Installation: 846 R9012 insert fits inside 846 R9010 camera mount clamp to allow installation onto the recta...
Material: Support assembly is fabricated from type 304 stainless steel and aluminum with delrin mounting clamp insert. Finish: Satin finish stainless. Weight: 1lb. 8oz. Models: Fits Boxster fac...
Reference Nr.: 846 R90 11
Disponibilité sur demande
355,00 EUR TVA 19% en plus
422,45 EUR TVA 19% inclus* Hors frais de Livraison
If you are after weight savings for the track or on a project car this is ideal. The factory rear bumper impact beam (U.S. model) weighs around 16 lbs. on average. This lightweight Carbon Kevlar Be...
Reference Nr.: KEV 505 020 00
Disponible
747,00 EUR TVA 19% en plus
888,93 EUR TVA 19% inclus* Hors frais de Livraison
Trying to save weight on your track car? This lightweight front bumper impact bar assists with shedding the pounds by replacing the heavy factory bar. It is manufactured by a motorsport supplier in...
Reference Nr.: KEV 505 010 00
Disponible
756,00 EUR TVA 19% en plus
899,64 EUR TVA 19% inclus* Hors frais de Livraison
If you are not running the center oil cooler or have misplaced the cover. Replace it with this high-quality GRP (Glass-Reinforced Plastic) reproduction. Sold individually. 1 Necessary per car. ...
Reference Nr.: FVD 505 055 00DECK
Disponibilité sur demande
108,00 EUR TVA 19% en plus
128,52 EUR TVA 19% inclus* Hors frais de Livraison
Send us your original spring plate and we will have it reconditioned for you. The reconditioning process includes full inspection to ensure proper operation after the remanufacturing process. We t...
Reference Nr.: FVD 333 009 05ATK
Disponibilité sous 4-14 jours
RRP: 545,33 EUR
209,00 EUR TVA 19% en plus
248,71 EUR TVA 19% inclus* Hors frais de Livraison
Our rear spring plate set is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. The adjustability allows for precise re-indexing of...
Reference Nr.: 911 333 009 05
Disponible
RRP: 545,33 EUR
209,00 EUR TVA 19% en plus
248,71 EUR TVA 19% inclus* Hors frais de Livraison
Our rear spring plate set is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. The adjustability allows for precise re-indexing of...
Reference Nr.: 911 333 009 06
Disponible
RRP: 635,58 EUR
320,00 EUR TVA 19% en plus
380,80 EUR TVA 19% inclus* Hors frais de Livraison
Send us your original spring plate and we will have it reconditioned for you. The reconditioning process includes full inspection to ensure proper operation after the remanufacturing process. We t...
Reference Nr.: FVD 333 009 02AT
Disponibilité sous 4-14 jours
175,00 EUR TVA 19% en plus
208,25 EUR TVA 19% inclus* Hors frais de Livraison
This rear spring plate is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. New OEM spec. (65 Shore) rubber bushings are installe...
Reference Nr.: 901 333 003 09
Disponible
RRP: 545,34 EUR
244,00 EUR TVA 19% en plus
290,36 EUR TVA 19% inclus* Hors frais de Livraison
This rear spring plate is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. New OEM spec. (65 Shore) rubber bushings are installe...
Reference Nr.: 901 333 003 09B
Disponibilité sous 4-14 jours
RRP: 502,06 EUR
249,00 EUR TVA 19% en plus
296,31 EUR TVA 19% inclus* Hors frais de Livraison
This non-adjustable rear spring plate is remanufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. New RS spec. (85 Shore) rubber bushi...
Reference Nr.: FVD 333 009 09ATK
Disponibilité sous 4-14 jours
RRP: 474,81 EUR
229,00 EUR TVA 19% en plus
272,51 EUR TVA 19% inclus* Hors frais de Livraison
In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our air-cooled cars to store them. The market is full of f...
Reference Nr.: FVD 642 911 00RHD
Disponibilité sur demande
110,00 EUR TVA 19% en plus
130,90 EUR TVA 19% inclus* Hors frais de Livraison