Camshaft 964 RS + Cup / 993 Cup / 993 Turbo + GT2 - Sport / Race - Right - MRA - 1.55 mm / 49mm BRG

Beskrivelse

This camshaft will increase performance throughout the entire rev range while maintaining its manners on the street. This cam requires mechanical rocker arms and does not require reworking of the valve pockets.

Specifications:
Valve Lift at TDC (mm) = 1.55 mm
Valve Clearance (mm) = 0.1 mm

This camshaft can also be used as a spare part for the 964 Cup / 964 3.8L RS / 993 Cup and 993 GT2 after 1996. The camshaft of the 964 3.8L RS and CUP is no longer available. This camshaft is identical to the 964 3.8L RS / CUP, however, this cam has a groove at the first bearing because the oil supply is there on the 993. Can be installed on the 964 housing without modification and can be used as a replacement for the 964 3.8L RS and Cup camshaft.

Please note: When changing the camshaft, always make sure that the parts in contact with the cam, such as rocker arms, tappets, valve adjustment plates, etc., are also replaced to prevent damage to the cam surface. The matching left side is part # 100105993007