ÖHLINS Coil Over Suspension Kit 997 C4 / C4S / GTS4 / Turbo / Turbo S - AWD - Road and Track

Beskrivelse

In our opinion, suspension is the path to superior performance. And this path leads us to a brilliant alternative to some of the more well-known Coilover suspension kits on the market. The Öhlins Road & Track Suspension is a best of both worlds Coilover package that provides supple ride comfort with consistent, laser like precision handling. In our experience, this Coilover package is aptly named as it is truly at home on the road or track.

Features:
Height adjustable
Rebuildable for a Lifetime of Service
DFV (Dual Flow Valve)
Corrosion salt spray tested (ISO 9227)
2 Year Limited Warranty

Front:
McPherson Strut
Single adjuster for compression and rebound damping
Spring preload adjuster Coil Springs
Use with original strut mounts

Rear:
Conventional Shock Absorber
Single adjuster for compression and rebound damping
Spring preload adjuster Coil Springs
Use with original strut mounts

DFV Technology Explained:
Dual Flow Valve technology sets Öhlins apart from the competition. With DFV, the dual flow valve gives the same characteristics on rebound as it does on compression, due to the damper fluid having a consistent path of flow in both directions. This means that the wheel and tire can quickly and effectively resume their position back on the ground, providing superior grip, traction and safety when driving the car on the limit. Because DFV opens more quickly and easily on minor road imperfections, ride comfort is surprisingly supple and more akin to an OEM strut than a Coilover set-up. Over undulating surfaces, the compliancy of the Road and Track (R&T) units allows the car to crest bumps and potholes, while keeping you stable and in control. Traction is always maintained at its optimum level. Öhlins Road & Track range uses DFV technology on every single fitment, making it the perfect upgrade for the enthusiast that needs comfort and agility in the one unit whether on the road or at the track.

Ride Height Adjustments:
When adjusting ride height on Coilover units, it's worth comparing how it's done. On many inferior designs, height is adjusted by raising or lowering the lower spring platform. This has the effect of compressing or extending the spring, which can limit the suspension travel and may cause topping out. The Öhlins method is to leave the spring seat in its perfect position, while the lower flange spins easily on the threaded body, to allow you to adjust with absolute precision while maintaining the intended design characteristics. Once you've set it all up, the adjuster simply locks off to maintain your exact settings!

Consistent Handling Characteristics:
Dampers will get hot. That's one thing that you can be sure of. As the piston moves within the damper, it generates friction – and therefore, heat. Although we can't stop heat, we can deal with it, and this is yet another way that Öhlins differs from the competition. As the heat increases, the viscosity of the damper fluid can change, altering the car's handling characteristics. Our unique needle bleed valve expands with temperature, closing the gap that the fluid travels through, maintaining a consistent damping rate. The best thing of all? You won't even notice! All you'll feel is that the car responds consistently, lap after lap, turn after turn. Allowing you to concentrate on braking points and apexes whilst the Öhlins technology takes care of the damping.

Fine tune dampening:
These kits all work well 'out of the box', but there's still plenty of adjustment for you to set things your way. You like stiff and reactive? Or soft and forgiving? It's all there. Too much low speed rebound damping can have an adverse effect on grip, so the easily accessible adjuster at the base of the Öhlins units allows small, but positive increments of fine tuning, so you can consider every single parameter. Sounds complicated? Nothing could be further for the truth. Just a few clicks either way from our factory settings will soon have your car responding precisely to your inputs and driving style. For track use simply turn the golden damper knob clockwise to set the damper to race mode, this will automatically change the low / high speed compression and bound / rebound damping so you can set blistering lap times.

When comparing suspension, why settle for second best?

Please Note: For models with the Bose sound package, please add part # 150902G7805501 to your order for simplified rear damper adjustment. Please check the model fitment tab to ensure accurate fitment.