Dual Sport Throttle Body 993 1996-98 VarioRam - Remanufactured - Send In
Dual Sport Throttle Body 993 1996-98 VarioRam - Remanufactured - Send In
Dual Sport Throttle Body 993 1996-98 VarioRam - Remanufactured - Send In

Dual Sport Throttle Body 993 1996-98 VarioRam - Remanufactured - Send In

Dele #: 220 110 993 15ATK
993 110 125 06

NOK 6 320,00 Uten MVA
NOK 7 900,00 ink.MVA
uten Frakt
Prisoppdatering Nødvendig

Beskrivelse

The 993 varioram models had an improved airflow that enhanced performance at low and mid-range speeds. This was achieved through a new induction system that included a dual throttle body. Our sport throttle body modification is designed to take full advantage of the varioram intake system by enlarging the primary and secondary throttle body diameter to force more air volume into the engine. This results in improved efficiency and performance throughout the entire rpm band. For even better results, we recommend using our varioram software upgrade*, which includes custom maps specifically designed to make the most of the new throttle body.

During the remanufacturing process, we conduct a full inspection of your throttle body to ensure its proper operation. The primary and secondary sides of the throttle body are disassembled and bored up to 2.7-inch (70mm) diameter - depends on the thickness of the housing. We thoroughly clean and degrease the entire throttle body and polish the internals to create more laminar flow. The shaft is then machined to accommodate larger butterflies that match the bore seamlessly. After that, we meticulously check all clearances for precision to ensure reliability.

FVD Throttle Body Remanufacturing Process:
Cleaned
Degreased
Inspected
Primary and Secondary Throttle Bodies Bored up to 2.7 inches (70 mm) depends on Throttle body housing– Original is 65 mm
Diameters Increased Before and After the Butterfly Valve
Larger Butterflies Installed to Match the Bore
Polished Internals for Laminar Flow
Clearances are Checked for Proper Operation

Send us your original throttle body and we will have it remanufactured for you. We do not offer a core exchange on this part.

Please note: This is only for 1996-98 varioram models. The original throttle body part # should be 993 110 125 06 for reference. These cars have engine codes: M64.20/21/22/23/24. *Not all DMEs can be upgraded with our throttle body software, it is best to check with the DME numbers (Porsche # and Bosch #) in advance. FVD Brombacher Software Upgrade is part # FVD99361871 for 1996 models and part # FVD99361870 for 1997 / 1998 models. Each throttle body is remanufactured in Germany, which means that the lead times may vary.

produktinformasjon

Også kjent under 22011099315ATK 220.110.993.15ATK 220-110-993-15ATK 99311012506 993.110.125.06 993-110-125-06

nøkkelord

Filmer