Valved Performance Muffler 957 Cayenne Turbo / Turbo S - Street / Race Sound

Beskrivelse

This is our Jekyll and Hyde muffler offering specially developed for the 957 Cayenne Turbo and Turbo S. It is the perfect compromise for you and your loved ones. Rich, deep and loud V8 Turbo with the valves open and soft subtle, stock like sounds with them closed. This muffler is effectively a muffler bypass with the valves open, so it offers the most volume available in our line up yet is factory quiet with the valves closed. It is truly the perfect compromise for a family hauler and leaves nothing on the table when you are enjoying a spirited driving session.

Features:
+ 16 HP & 10 TQ Gain
German V2A - X5CrNi18-10 - 1.4301 (T-304 L) Stainless Steel
Low, Near Factory Decibels Around Town with the Valves Closed
Loud, Menacing, Wide Open Growl with Plenty of Turbo Whistle with the Valves Open
Increased Decibels above 4,000 rpms when the Valves Open
Lightweight Construction
Exotic Porsche 4.8 L V8 Sound
Ideal for use with Original Primary Cats and Original Secondary Cats – For Areas with Strict Emissions
Handcrafted in Germany
No Cutting or Trimming Necessary
Reduced Backpressure
Includes Factory Style Exhaust Hangers
Emissions Compliant - ECU Software Not Necessary – No Check Engine Light
Reuses OEM Exhaust Tips or FVD Exhaust Tips

This muffler varies greatly from designs that are common in the aftermarket. It is uniquely made from German V2A - X5CrNi18-10 - 1.4301 (T-304 L) lightweight grade stainless steel and includes double perforated sound absorption tubes based on the Halbgegenstromprinzip (half counter current principle). The acoustic silencer absorption tubes are made in a trapezoidal pattern and are perforated with varying diameters. This design isolates and dampens the unwanted frequencies that create drone. But we also took it a step further and factory stamped the outer shell to cancel the unwanted frequencies even further. This design reduces more back pressure than the factory mufflers at higher gas velocities. The end result is greater performance gains throughout the entire rev range with better throttle response, especially when paired with software, intake and further exhaust modifications. For those looking for an even more menacing growl without drone, we recommend our secondary bypass, part # BES95502040S2. We categorize our mufflers sound levels from the mild street version (TÜV approved for Europe), up to the more exotic sounding sport version and finally the wide open, pulse pounding, race version.

Please note: It is necessary to control the valves with our valved exhaust retrofit kit, part # BESKLS000002 and you can control the valves via key chain with our optional remote-control kit, part # BESKLS0000FB. We recommend a muffler installation kit, part # FVDMK957001 to simplify installation. Now is the ideal time to save on labor costs and replace your rubber muffler hangers, part # 95511122750.