Cayenne Turbo 955 - Level2 - 540 HP / 553 TQ

Beskrivelse

Kit includes:
ECU Software with Handheld Flashtool, Sport Air Filters (2), Sport Exhaust Muffler, Catalytic Bypass Pipes

FVD's level 2 kit for the Cayenne Turbo adds 90BHP while keeping stock driveability! This kit brings a whole new life to the Turbo with added performance and sound! The muffler and catalytic-bypass included in this kit give the truck the agressive exhaust note to backup the added performance.

Genuine:
Engine - V8 Twin-Turbo
Capacity - 4511ccm
Compression ratio - 9,5:1
Max. Power - 331kW (450HP) @ 6000rpm
Max. Torque - 620Nm (457 lbf ft) @ 2250-4750rpm
Max. Speed - 266km/h
Max. RPM - 6500rpm
Acceleration 0-100km/h - 5.6s

Tuning:
Max. Power - 397kW (540HP) @ 6000rpm
Max. Torque - 750Nm (553 lbf ft) @ 4000rpm
Max. Speed - 280km/h
Max. RPM - 6700rpm
Acceleration 0-100km/h - 5.1s

- A simple handheld OBD2 tool is provided to flash your Cayenne conveniently at home!
- Software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- Dyno Proven and comprehensively tested on the Autobahn and under daily driving conditions.
- All of the OEM engine software safety features are fully intact and not disabled.
- Customizable for your needs (larger turbo chargers, exhausts, intercoolers, etc.).

FVD vs. the competition

- Removal of the computer from the vehicle to be sent out for reprogramming is NOT necessary!!
- Our software accommodates 91-100 octane automatically (adjusts timing and knock sensors all the way up to 100+ Octane) no need for a several expensive octane files.
- Customizable for your needs (larger turbo chargers, exhausts, intercoolers, etc.) all for the same initial price.
- You receive the FVD software file and the OEM software file.
- Our software automatically sets quicker responding tiptronic parameters directly on the ECU. No need for the TCU unit to be sent to us.
- 25 + years of software tuning knowledge.

FVD-Brombacher's flash load tool provides the ability to read out and load programmed software directly thru the vehicles OBD II port. No need to remove the DME from the vehicle!
We supply you with a handheld flash tool, which interfaces directly with the diagnostic port (OBD II). Read-out of the vehicles ECU takes place with the click of a button on the handheld device. After read-out simply email the software file to us. We customize your file and sent it back via email directly to you. Load the file back into the vehicle via the handheld flash tool.