Show Results For: Boxster 986 (97-04)
Active Filter:
Boxster 986 (97-04)Synchro-tester
Tool for synchronizing carburettors. Measures the air intake on each carburettor or mechanical fuel injection stack for a smooth idle and power delivery. Easy to use.
Reference No.: BES 000 000 008
In Stock
Warehouse USA
$ 76.00
without Shipping
without Shipping
Reference No.: FVD 721 116 594
Availability upon request
$ 329.55
without Shipping
without Shipping
Tire Gauge - FLAIG - 11.8 inch (30 cm) Hose Connector & Release Valve - 4 Bar + 0-57 psi
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release a...
Reference No.: FVD 721 801 049
In Stock
Warehouse Germany
$ 102.00
without Shipping
without Shipping
Tire Gauge - FLAIG - 45° Adapter
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is measured via fingertip button an...
Reference No.: FVD 721 801 046
In Stock
Warehouse Germany
$ 44.00
without Shipping
without Shipping
Tire Gauge - FLAIG - Includes 3 Adapters (0° - 45° - 90°)
Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release a...
Reference No.: FVD 721 801 047
In Stock
Warehouse Germany
$ 108.00
without Shipping
without Shipping
Tire Saver Ramp - Set of 4 - Each is 20 Inches Wide
This set includes a revolutionary concept for protecting your tires while storing your vehicle. These tire savers have no recess! Independent tests have shown that a depression only makes sense if...
Reference No.: FVD 200 004
In Stock
Warehouse Germany
$ 270.00
without Shipping
without Shipping
Tool - Camshaft Timing
This degree wheel is used for the precise adjustment of camshafts. Fixed on the crankshaft it shows precise the degrees and the Top Dead Center – Bottom Dead Center (TDC - BDC). This tool makes ad...
Reference No.: FVD 721 100 105
In Stock
Warehouse Germany
$ 78.64
without Shipping
without Shipping
Tool - Dial Gauge Holder - Z Block with Extension Pin
Needed for accurate adjustment of valves. Also includes a 50mm dial indicator extension pin. Dial indicator stem hole is 8mm and the valve head cover screw hole is 10 mm.
Tool - Metric Dial Gauge
A metric dial gauge is a must for setting cam timing, measuring flywheel end play, crank shaft end play, etc. This is an extremely high quality, German “Käfer” gauge whose design conforms to stric...
Reference No.: FVD 721 T63
In Stock
Warehouse Germany
$ 81.00
without Shipping
without Shipping
Tool - Vacuum Tester Kit / Brake Bleeder
Vacuum testing is gaining more importance every day as cars have more sophisticated servo-feedback devices fuel injection, EGR, emission controls, air conditioning, door locks, etc. You can waste h...
Reference No.: FVD 721 883 0810
In Stock
Warehouse Germany
$ 67.00
without Shipping
without Shipping
Tool - Vacuum Tester Kit / Brake Bleeder - Complete
High quality, German made brake bleeder and vacuum pump kit. Ideal for use on brakes, clutches, HVAC, bleeding the fuel system or testing vacuum on a turbocharged system. Vacuum can be tested up ...
Reference No.: FVD 721 883 081
Expected in 4-14 days
$ 224.00
without Shipping
without Shipping
Reference No.: VW3 853 0
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 1,378.00
without Shipping
without Shipping
Reference No.: VW3 853
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 1,300.00
without Shipping
without Shipping
Reference No.: VW3 854
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 1,294.00
without Shipping
without Shipping
Reference No.: VW3 853 7
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 104.00
without Shipping
without Shipping
Torque Wrench 1/2" 10-60 Nm
Hazet 5120-3CT Drehmomentschlüssel (1/2"), 10-60 Nm,) - Abtrieb: 12,5 mm (1/2") - Genauigkeit ± 3% - Drehmomentbereich: 10-60 Nm - Skaleneinteilung: 0,5 Nm - Länge: 320 mm - Made in Germany
Reference No.: FVD 721 801 087
Availability upon request
$ 247.00
without Shipping
without Shipping
Reference No.: FVD 721 801 080
Expected in 1-3 days
Warehouse Germany
Warehouse Germany
$ 270.00
without Shipping
without Shipping
Reference No.: FVD 721 801 083
Expected in 4-14 days
$ 1,679.00
without Shipping
without Shipping
Torque Wrench 3/4" 140-980 Nm
Umschaltknarre zur Drehmomentüberprüfung an Verschraubungen mit Rechtsgewinde Klicksignal bei Erreichen des eingestellten Drehmoments Verriegelung des eingestellten Drehmomentwertes in Kunststoffka...
Reference No.: FVD 721 801 0861
In Stock
Warehouse Germany
$ 319.00
without Shipping
without Shipping
Reference No.: FVD 721 801 081
Availability upon request
$ 2,304.00
without Shipping
without Shipping
Uni-Syn (butterfly can be synchronized)
Measures air intake of carbs and fuel injection stacks so that each butterfly can be synchronized for smoother running and full power.
Reference No.: FVD 721 T27
In Stock
Warehouse Germany
$ 26.00
without Shipping
without Shipping
Universal Battery Cut Off Switch - 12 V
Allows you to quickly disconnect your battery by simply unscrewing the knob. Your car will be immobilized for security and will protect your battery. A separate fuse link is also supplied for the...
Reference No.: FVD 612 002
In Stock
Warehouse Germany
$ 34.00
without Shipping
without Shipping
Universal Battery Master Cut Off Switch - 12 V
Battery switch that allows you to disconnect all battery functions with the simple turn of the removable key. Perfect for racing and motorsports applications. The battery master cut off switch al...
Reference No.: FVD 612 001
In Stock
Warehouse Germany
$ 26.00
without Shipping
without Shipping
Valve spring adjuster
Einstellwerkzeug für Einbaumass Serien-Ventilfeder mit Serien-Nockenwellen von 34,5mm - 35,5 mm im 1mm Schritt skaliert.
Reference No.: FVD 721 000 04
Expected in 4-14 days
$ 2,508.00
without Shipping
without Shipping
Valve Spring Tester - Benchtop
Standard valve springs reach only 85 kg. FVD-Motorsport-Springs have up to 105 kg! The desired value for Race-Engines is max. 104 kg! The electronic spring scales is recommended to check the spring...
Valve Stem - BBS - 28 mm length / 11-13 mm valve hole diameter
Genuine lightweight aluminum BBS Motorsport Valve Stem. This is used predominantly on BBS Motorsport wheels like the E30, E50, E26, E 28 and E88. It has a 28 mm length / 11-13 mm valve hole diamet...
Reference No.: 113 915 001
In Stock
Warehouse Germany
$ 15.00
without Shipping
without Shipping
Valve Stem - Metal - 12 mm (.47 inch) shaft
Valve especially for high lateral loads and quick acceleration. Also for cars running high inflation pressures and high temperatures. Maximum Temperature for the Seal: 150 ° C. Maximum Pressure...
Reference No.: FVD 362 034 03
In Stock
Warehouse Germany
$ 9.00
without Shipping
without Shipping
Valve Stem - Metal - 12 mm (.47 inch) shaft
Premium German Made metal valve stem with a high quality seal to prevent leaking. Valve Hole Diameter: 11.3 mm (.44 inches) Length: 42 mm (1.65 inches) Shaft: 12 mm (.47 inches) Weight: 32.8 gram...
Reference No.: FVD 362 034 01
In Stock
Warehouse Germany
$ 9.00
without Shipping
without Shipping
Valve Stem - Metal - 5 mm (.2 inch) shaft
Premium German Made metal valve stem with a high quality seal to prevent leaking. Valve Hole Diameter: 11.3 mm (.44 inches) Shaft: 5 mm (.47 inches) Weight: 31 grams Made in Germany Sold Individ...
Reference No.: FVD 362 034 00
In Stock
Warehouse Germany
$ 9.00
without Shipping
without Shipping