Show Results For: C2 (94-98)
Active Filter:
C2 (94-98)Contact Switch Set - Door 911/928/964/993 (66-)
Dieses Set beinhaltet den Türkontaktschalter, Fiber-Unterlegscheibe, Tellerscheibe und den Gummi Türkontakt
Reference No.: 964 613 601 00SET
In Stock
Warehouse Germany
$ 28.47
without Shipping
without Shipping
Control Arm - Clubsport - Front - LEFT - Reconditioning of your own original part (85 Shore)
Unsure about installing replacement bushings and bearings? Send us your Control Arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process incl...
Reference No.: FVD 341 017 02ATK
Expected in 4-14 days
$ 380.00
without Shipping
without Shipping
Control Arm - Clubsport - Front - RIGHT - Reconditioning of your own original part (85 Shore)
Unsure about installing replacement bushings and bearings? Send us your Control Arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process incl...
Reference No.: FVD 341 018 02ATK
Expected in 4-14 days
$ 380.00
without Shipping
without Shipping
Control Arm - Original - Front - LEFT - Reconditioning of your OEM part
Unsure about installing replacement bushings and bearings? Send us your Control Arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process inclu...
Control Arm - Original - Front - Right - Reconditioning of your OEM part
Unsure about installing replacement bushings and bearings? Send us your Control Arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process inclu...
Control Arm - RACE - Front - LEFT - Reconditioning of your OEM part
Unsure about installing replacement bushings and bearings? Send us your Control Arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process incl...
Reference No.: FVD 341 017 02RAK
Expected in 4-14 days
$ 399.00
without Shipping
without Shipping
Control Arm - RACE - Front - LEFT - Reconditioning of your OEM part
We will send you a reconditioned Control Arm, kindly send back your old part, or "core". The reconditioned Control Arm has been full inspected, disassembled, degreased and we have properly install...
Reference No.: FVD 341 017 02RAT
Expected in 4-14 days
$ 400.00
without Shipping, without core charge $ 474.00
without Shipping, without core charge $ 474.00
Control Arm - RACE - Front - RIGHT - Reconditioning of your OEM part
Unsure about installing replacement bushings and bearings? Send us your Control Arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process incl...
Reference No.: FVD 341 018 02RAK
Expected in 4-14 days
$ 399.00
without Shipping
without Shipping
Control Arm - RACE - Front - RIGHT - Reconditioning of your OEM part
We will send you a reconditioned Control Arm, kindly send back your old part, or "core". The reconditioned Control Arm has been full inspected, disassembled, degreased and we have properly install...
Reference No.: FVD 341 018 02RAT
Expected in 4-14 days
$ 400.00
without Shipping, without core charge $ 474.00
without Shipping, without core charge $ 474.00
Control Arm 993 - Toe Link - Sport - Rear - Lower - New
The tow link is the furthest rear control arm on the rear axle. It is responsible for the toe angle adjustment. The OEM control arm bushings are simply too soft for track events and the Teflon mon...
Reference No.: FVD 331 043 81
In Stock
Warehouse Germany
$ 410.87
without Shipping
without Shipping
Control Arm Bushing 993 - Rear - Original - Upper
Original rubber replacement bushing (65 shore hardness value) for the rear control arms (Camber Link and Caster Link). This bushing cartridge is weather sealed and is crafted in high carbon steel ...
Reference No.: FVD 331 500 45
In Stock
Warehouse Germany
$ 59.00
without Shipping
without Shipping
Control Arm Bushing 993 - Rear - Sport - Upper
Replace worn-out soft rubber (65 shore hardness value) control arm bushings (Camber Link and Caster Link) with sportier rubber (75 shore hardness value) that is more durable, provides more positive...
Reference No.: FVD 331 500 45R
In Stock
Warehouse Germany
$ 63.00
without Shipping
without Shipping
Control Arm Bushing Kit 964 / 965 / 993 - Monoball - Race - Rear
This kit is complete and includes a total of 8, 4 smaller and 4 larger for the rear control arms. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 T6 aircraft alum...
Convertible / Cabrio Top 993 - Complete - Black - with Zipper Window
This is a complete cabrio top made in Germany with original Sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a PVC plastic rear wi...
Reference No.: 993 573 092 02EQ
Expected in 4-14 days
$ 257.00
without Shipping
without Shipping
Cover for Blower - Carbon
ALL MOTORSPORT AND RACING PARTS ARE SPECIAL ORDER ITEMS. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-ref...
Reference No.: 964 106 409 80
Expected in 4-14 days
$ 59.00
without Shipping
without Shipping
Reference No.: 950 116 725 00
In Stock
Warehouse Germany
$ 3.00
without Shipping
without Shipping
Crankcase Breather Gasket
High-quality AFM 38 Victor Reinz replacement gasket, designed to perform like the original. AFM 38 is resistant to oil and solvents and is outstandingly gas-tight. AFM is highly flexible, so it y...
Crankcase Screw - Right Side
Sold Individually. 2 Necessary Per Car.
Reference No.: 964 101 174 01
In Stock
Warehouse Germany
$ 25.00
without Shipping
without Shipping
Reference No.: 964 101 138 70EQ
In Stock
Warehouse Germany
$ 386.00
without Shipping
without Shipping
Crankshaft Position Sensor
If you are noticing engine vibrations, misfires and even backfiring your crankshaft position sensor maybe bad. Your car’s DME (ECU) uses the signal from the crankshaft position sensor to control ig...
Crankshaft Sealing Ring - 30 x 50 x 10 mm
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold Indi...
Crankshaft Sealing Ring - Rear - Flywheel End - 90 x 110 x 12 mm
High-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold Indi...
Crossover Bypass Pipe Set 993 - OBD1 - Bischoff Flange
Are you looking to improve your performance on the racetrack? If so, you may want to consider investing in this cross-over catalytic bypass set. This set effectively routes the left bank to the rig...
Crossover Bypass Pipe Set 993 - OBD1 - Gilett Flange
Are you looking to improve your performance on the racetrack? If so, you may want to consider investing in this cross-over catalytic bypass set. This set effectively routes the left bank to the rig...
Reference No.: 190 111 043 G
Availability upon request
$ 641.00
without Shipping
without Shipping
Crossover Sport Catalytic Set 993 - OBD1 + OBD2 - 100 Cell - Bischoff Flange - With Installation Kit
Are you experiencing issues with your current catalytic converters? Or are you looking to enhance your vehicle's performance? Look no further because this set of sport catalytic converters is the p...
Crossover Sport Catalytic Set 993 - OBD1 + OBD2 - 100 Cell - Gillett Flange - With Installation Kit
Are you experiencing issues with your current catalytic converters? Or are you looking to enhance your vehicle's performance? Look no further because this set of sport catalytic converters is the p...
Crush Washer - 22 x 27 mm
High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually.
Reference No.: 900 123 011 20
In Stock
Warehouse Germany
$ 2.00
without Shipping
without Shipping
Crush Washer - A 18 x 22 mm
Crush Washer typically used for the oil drain plug or the turbo oil reservoir. Sold Individually.
Reference No.: 900 123 140 30
Expected in 4-14 days
$ 2.00
without Shipping
without Shipping
CV Boot / Dust Bellow
If your CV Joint Boot is cracked or torn, dirt and debris will adhere to the grease causing premature wear and eventual failure. We recommend installing new clamps with the boot, large clamp # i...
CV Joint End Cap - Splined
This is a high-quality OEM (Original Equipment Manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. ...
Cylinder Base O-ring - 102 x 2 mm (green)
Sold Individually. 6 Necessary Per Car.
Cylinder Head Gasket 964 / 993
This is the cylinder to head gasket, we recommend replacing this gasket each time you remove the head to perform maintenance. Sold Individually. 6 Necessary Per Vehicle.
Cylinder Head Nut
Cylinder head nuts can become corroded and warped with time. Ensure proper torque settings by replacing yours anytime you are working on the cylinder head. Sold Individually.
Reference No.: 901 104 382 03
In Stock
Warehouse Germany
$ 6.00
without Shipping
without Shipping
Cylinder Head Nut 964 / 993
Cylinder head nuts can become corroded and warped with time. Ensure proper torque settings by replacing yours anytime you are working on the cylinder head. PLEASE NOTE: These only fit the 964 wit...
Cylindrical Roller BRG - G50 Transmission - 30 x 62 x 20 mm - Made in Germany
Cylindrical Roller Bearing located nearest the transmission main shaft bearing. Sold Individually. 1 Necessary Per Car.
Cylindrical Roller BRG - G50 Transmission Cover / Housing - 35x80x17mm
Overall height 17 mm, bearing has groove in outer ring - thereforeect installation perf Cylindrical Roller Bearing located on the bottom of the gear housing nearest the gear housing. Sold Indivi...
Cylindrical Roller Bushing - G50 Transmission Cover / Housing - 30 x 62 x 16 mm
Genuine Cylindrical Roller Bearing located on the bottom of the gear housing nearest the transmission cover and on the lower gear housing for the G64.20 / 21 C4 / C4S transmission. Sold Individual...
Cylindrical Roller Bushing - G50 Transmission Cover / Housing - 30 x 62 x 16 mm "Made in Germany"
Cylindrical Roller Bearing located on the top of the gear housing, nearest the housing. Sold Individually. 1 Necessary Per Car.