KW Coilover Suspension Kit 997.1 GT2 / 997.2 GT2 RS - RWD - Variant 3 - Clubsport - Without PASM

Description

Variant 3 is KW Suspensions competition level coil over kit which is ideal for highly tuned street performance and Clubsport track events. It combines cutting edge motorsports technology with independently configurable lowering and damper settings to optimize grip and handling characteristics, improve cornering behavior and directional stability.

The KW Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The two-stage, patented TVR-A (Twin Valve Rebound - Adjustable) technology enables a small volume of oil to flow through an adjustable, conically shaped, low-speed bypass during low damper speeds, while in the case of higher damper speeds, the main rebound stage valve opens allowing a larger volume of oil to flow. This provides a big improvement in terms of ride comfort without influencing the safety-relevant high-speed range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control. The KW Variant 3 Coilovers utilize TVC-A (Twin Valve Compression - Adjustable) technology with 12 precise clicks which can increase or decrease the flow of valve to achieve either more or less low speed compression damping. During sudden high-speed impulses, the spring-loaded needle valve, and the spring-loaded main valve open to their maximum valve cross section, acting as a digressive blow-off characteristic to avoid transmitting undesired forces through the suspension into the chassis. This provides a better platform for the vehicle body and at the same time offers more comfort than with conventional valve technology during high wheel acceleration. The dampers come preset with baseline shock settings right out of the box which provide an optimal starting place for your car while providing a wide adjustment window for true performance optimization.

With KW Variant 3 Coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension with adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. Each Coilover is manufactured of resilient stainless-steel struts, corrosion-resistant springs, dirt-resistant trapezoidal threads and polyamide threaded rings to ensure repeatable results for years to come.

Features:
Front ride height adjustment from 0” – 0.8” (0-20 mm)
Rear ride height adjustment from 0” – 0.8” (0-20 mm)
Height adjustable by threaded shock bodies
Specifically tuned for Porsche applications
Unlimited individuality for performance and comfort
Separate damper force adjustment for rebound and compression
Dirt resistant trapezoid thread and composite adjustment collar
100% corrosion resistant KW stainless steel
Extensively tested
Made in Germany

Since 1992, KW Automotive has been driving innovation as a manufacturer of individual suspension solutions for the street and track. Automobile manufacturers, auto enthusiasts, reputable tuners and international motorsports teams rely on German made KW Coilovers. All KW products are tested comprehensively on the street, the KW 7-post chassis dynamics test rig and on the Nürburgring Nordschleife.

Sold individually. 1 Necessary per car.

Please Note: Please check the model fitment tab to ensure accurate fitment.