Valved Sport Exhaust System 991.2 Turbo / Turbo S - Brombacher - Super Sport Version

Description

This Super Sport Valved Exhaust System offers uncompromising sound and performance for the street. It is truly is a best of both worlds design, conservative when cruising and a full on assault to the senses under full load with the valves open. FVD Brombacher Germany sources our exhaust systems with the widest range of sound levels and performance on the market. Sound levels range from mild, more conservative street systems, exotic sounding sport systems and wide open, pulse pounding, race systems. Each system has been developed to work together without compromise. Our entire “Brombacher” line of exhausts is manufactured by M&M Exhaust, GmbH in Germany. They manufacture a multitude of Porsche Motorsport, Porsche Race Exhausts and Porsche Street Exhausts. Each system is manufactured in the highest-grade German V2A - X5CrNi18-10 - 1.4301 (T-304 L) light weight stainless steel and is tested comprehensively for exhaust gas scavenging, velocity, thermal stress, cracking and longevity. M&M exhausts have competed in and won many 24-hour races over the years including Nordschleife, Le Mans, Dubai, Daytona to name a few. When you purchase this exhaust system, you are the benefactor of all that Porsche racing exhaust design experience. If you are looking for an exhaust product that can handle abuse at the track, or on the street look no further.

Features:
+ 25 Hp & + 19 torque
200 Cell high flow, tri metal German HJS “HD” high durability matrix sports catalysts
2 3/4" tubing (70mm) for max. power across the rpm range
German V2A - X5CrNi18-10 - 1.4301 stainless steel for improved durability
3.5 on a scale of 1-10 in volume (3 stock) below 3,000 rpms with valves closed
9 on a scale of 1-10 in volume under maximum load (5 stock) with valves open
Aeroquip cone style catalytic connection design to prevent exhaust leaks
Made in Germany
Modular design
Intoxicating motorsports growl at idle, partial throttle and wide-open throttle

Please Note: This system will require our retrofit kit part # BESKLS000001. This was designed specifically for a Porsche Dealer who installs this kit with the factory PSE button on the console for a factory like look.

BROMBACHER MUFFLERS are vastly different than the common aftermarket, baffle plate and packing type mufflers. Our mufflers are uniquely made with double perforated sound absorption tubes. These tubes are made in a trapezoidal pattern and are perforated with varying diameters, which isolates and dampens unwanted drone frequencies. In relation to performance, they produce much less flow restriction at higher gas velocities, which translates to larger horsepower gains at higher RPMs. Also, they prevent a total loss of backpressure at lower rpms, so low end torque loss is minimized. Perhaps the greatest benefit of the “open architecture” design, is the strong, linear, firing-order dominated flat-6 Porsche sound with aggressive gurgling and crackling off throttle.

THE CATALYTIC CONVERTER cores used in this system are the most advanced in the industry. They are produced by HJS in Germany and are a 200 CPSI (cell per square inch) tri-metal design. Tri-Metal cats are the freest flowing, environmentally friendly aftermarket cats produced today. Tri-metal catalytic converters are Rhodium, Platinum and Palladium coated and perform all three necessary and mandated reactions to prevent pollution. Reduction of nitrogen oxides to nitrogen and oxygen, oxidation of carbon monoxide to carbon dioxide and oxidation of unburnt hydrocarbons to carbon dioxide and water simultaneously. But we didn't stop there with these catalytic converters; we also opted for the most expensive HJS “HD” cores. The new generation of HJS high performance catalysts is characterized by 30 % less weight and 15% less backpressure. They are nicknamed “HD” for high durability matrix design catalytic converters. They have a “SM-matrix” (winding of three flat and corrugated foils) and a special connection to the matrix sheath (see picture below), which equates to extremely high flow and durability for track and street use. Many of our competition simply state the cells per square inch or “German Cats” but they are not specific as this portion of any exhaust system is THE MOST EXPENSIVE component. We choose to include the best cores available on the market to ensure years of trouble-free operation, reduce weight, increase horsepower and protect the environment.

THE ENTIRE BROMBACHER EXHAUST LINE is made by a premier motorsports manufacturer, M&M Exhaust, GmbH in Germany. “Brombacher” exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. They are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all our exhaust systems meet the material standards of the German independent testing agency TÜV (some exhausts do not pass the sound standards as they are louder than the TÜV requires – please enquire); whose quality standards are among some of the strictest in the world. All this research, development and testing ensures maximum horsepower gains throughout a broad power band; all while maintaining reasonable sound levels for the street and provide a distinct, sporty exhaust note that is purely Porsche.

Please note: This will not fit an Exclusive Model as those may require tip modifications.