Ligne d'échappt.sport à clapets 997 -08 "BROMBACHER" inox, 100 cellules, 4 sorties Ø90mm

Description

Exhaust system with valves for the 997 -08

FACTS:

- Equal Length Headers with Long Tube Design
- 100 Cell German HJS Sport Catalysts with “U Torque” design
- 2 3/4" Tubing (70mm)
- Sealing Cone Style Connections and Quick Release Clamps
- 4 x 3.5"(90mm) Round Tips
- Made in Germany
-+ 21 Hp & + 12 lb.-ft torque Gain with exhaust system only. Based on 997S.
- Weighs 62 lbs.(28,0 Kg).
- Includes valves for stock sound and a true GT3 Cup like race sound!
- Software has to be adjusted to accommodate this setup.

FIGURES:

Genuine:
Engine - 6 Cylinder Boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kW (355HP) @ 6600rpm
Max. Torque - 400Nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. RPM - 7300rpm
Acceleration 0-100km/h - 4.8s

Tuning (Includes FVD software, sport airfilter and exhaust):
Max. Power - 283kW (385HP) @ 6500rpm
Max. Torque - 441Nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. RPM - 7900rpm
Acceleration 0-100km/h - 4.4s

Our “BROMBACHER” system has a 70mm tubing and is modular, meaning that the system components have been designed to work together and any one of the three components can not be installed along with the stock components. This is due to the use of 2 3/4" (70mm) tubing which cannot be restricted.

We strongly suggest replacing worn gaskets and hardware with our pre-packaged installation kits.
Use Part # FVD MK9 972 00, FVD MK9 973 00 and FVD MK9 970 01.

FVD is proud to introduce our newest line of Brombacher exhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity.

Brombacher mufflers are “factory stamped” externally; unlike our competitors systems. This outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacher exhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly 40% lighter compared steel and are available for late model, water cooled applications. Each of our exhaust's have been extensively tested on both a chassis and engine dyno as well as logged thousands of miles on both the street and at the track. All this research, development and testing ensures maximum horsepower gains throughout a broad power band; all while maintaining reasonable sound levels for the street and provide a distinct, sporty exhaust note that is purely Porsche.

We strongly suggest replacing worn gaskets and hardware with our pre-packaged installation kits.

Like all European Vehicles, FVD parts are TÜV approved. What is TÜV approval you ask? Basically, German-registered road vehicles may not be operated on public roads without a certificate from the TÜV. Also, all modifications must be approved, from installing tires of a different size to materials used in nuts and bolts. TÜV's safety guidelines are among the strictest in the world, and getting a road permit for thoroughly customized vehicles borders on the impossible.
FVD's parts passed these criteria in order to obtain the TÜV stamp of approval:

• Corrosion Test – Exterior metal parts (ie exhaust, brakes, rims, etc.) must undergo a HCL (Hydrocloric Acid) bath, which speeds up the corrosion process. This ensures long lasting, highly durable parts which benefit the end consumer.
  
• Extreme Temperature Test – Items are put through –40 degree's Celcius to + 85 degree's Celcius sudden temperature change. This test ensures that material expansion and contraction does not cause cracking or material inconsistency.
  
• Material Analysis – Chemical and Microscopic material analysis is done to determine the correct percentages of Iron, Zinc and many other elements. This also ensures material consistencey and longevity.
  
• Exhaust Temperature Test – Exhaust items are also put through a series of extremely high temperature tests in order to assure the consumer that parts can withstand cracking and splitting. Test temperatures exceed 1,400 degree's Celcius!! For reference normal exhaust gas temperatures are only 800 degree's Celcius.
  

FVD Exhaust Systems Carry A 2 Year Warranty!.